Truck Crane MAKROQ AC80

The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.

Lifting capacity80 t
Boom length48 m
Load moment3 175 kN·m
Working weight48 t
FeatureWheeled chassis
80 t Truck Crane MAKROQ AC80

Description

The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.

The telescopic boom allows fast changes of height and radius without installing additional sections. The outriggers form a stable working footprint, and the slewing platform allows the working area around the machine to be served. Separate control of the undercarriage and the crane unit simplifies preparation for work and precise positioning of the load.

The machine is used in industrial and civil construction, in the erection of steel structures and engineering equipment, in infrastructure maintenance, and in warehouse and logistics operations.

Key parameters: maximum lifting capacity — 80 t; rated engine power — 276 kW; maximum boom length with jib — 74.5 m; maximum main boom radius — 36 (boom length 48 m); minimum turning diameter — 24 m.

Advantages

Advantages

  • A lifting capacity of 80 t allows work with the corresponding class of loads.
  • A power of 276 kW provides the necessary reserve for working and travel operations.
  • A maximum boom length with jib of 74.5 m extends the available working area.
  • The boom system allows the height and radius to be changed for a specific erection task.
  • The outrigger footprint improves stability when lifting and slewing the load.
  • The slewing mechanism creates a wide working area without frequent repositioning of the machine.
  • The winch and hydraulic mechanisms ensure smooth positioning.
  • The design is intended for repeated erection and loading cycles.

Technical specifications

Max. lifting capacity, t80
Maximum load moment, kN·m1011
Maximum transport weight, t48
Rated engine power, kW276
Volume, L8.82
Overall length, mm14700
Overall width, mm2750
Overall height, mm3910
Front axle load, t8,3/8,3
Rear axle load, t31,4
Maximum lifting capacity80 t
Maximum load moment1011 kN·m
Maximum transport weight48 t
Rated engine power276 kW
Volume8.82 L
Overall length14700 mm
Front axle load8,3/8,3
Rear axle load31.4 t
Engine modelSINOTRUK D10,38-50
Emission standardEuro V
Maximum speed80 km/h
Minimum turning diameter24 m
Minimum ground clearance305 mm
Number of seats in the cab3
Maximum main boom radius36 (boom length 48 m)
Main boom length12.4 m
Fully extended boom length48.0 m
Maximum boom length with jib74.5 m
Boom raising time55 s
Boom full extension time80 s
Maximum main winch hoisting speed (single line)145 m/min
Maximum auxiliary winch hoisting speed (single line)90 m/min
lifting capacity80t
load moment3175kN·m
boom length48m
weight48t
Crane typeself-propelled boom crane
Chassistruck
Boom typetelescopic
Boom profilehigh-strength box section
Number of boom sectionsmulti-section
Boom extensionby hydraulic cylinder and wire rope pulley block
Boom angle adjustmentby hydraulic cylinder
Slewing platformfull-slewing
Main winchhydraulic
Auxiliary winchdepending on the version
Working unithook block
Jiblattice, depending on the version
Outriggershydraulic
Support footprintH-type or combined
Mechanism drivehydraulic
Controlselectro-hydraulic
Load moment limiterelectronic
Outrigger monitoringposition and load sensors
Motion limiterslifting, extension and slewing
Operator cabseparate crane cab
Working zone360°
Transport positionboom over the front support

Configuration

Configuration

  • Engine SINOTRUK D10.38-50
  • Main boom 12.4 m
  • Jib
  • maximum length of the boom system 74.5 m
  • Main hoisting winch
  • Auxiliary hoisting winch.

Documentation

Manufacturer's specification
Certificate of conformity
Operation manual
Repair manual
Spare parts catalog

Overview