The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.
Description
The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.
The telescopic boom allows fast changes of height and radius without installing additional sections. The outriggers form a stable working footprint, and the slewing platform allows the working area around the machine to be served. Separate control of the undercarriage and the crane unit simplifies preparation for work and precise positioning of the load.
The machine is used in industrial and civil construction, in the erection of steel structures and engineering equipment, in infrastructure maintenance, and in warehouse and logistics operations.
Key parameters: maximum lifting capacity — 55 t; rated engine power — 277 kW; maximum boom length with jib — 62.3 m; maximum main boom radius — 40 (boom length 46 m); minimum turning diameter — 24 m.
Advantages
Advantages
- A lifting capacity of 55 t allows work with the corresponding class of loads.
- A power of 277 kW provides the necessary reserve for working and travel operations.
- A maximum boom length with jib of 62.3 m extends the available working area.
- The boom system allows the height and radius to be changed for a specific erection task.
- The outrigger footprint improves stability when lifting and slewing the load.
- The slewing mechanism creates a wide working area without frequent repositioning of the machine.
- The winch and hydraulic mechanisms ensure smooth positioning.
- The design is intended for repeated erection and loading cycles.
Technical specifications
| Max. lifting capacity, t | 55 |
| Maximum load moment, kN·m | 703 |
| Maximum transport weight, t | 43.1 |
| Rated engine power, kW | 277 |
| Volume, L | 8.82 |
| Overall length, mm | 14340 |
| Overall width, mm | 2800 |
| Overall height, mm | 3700 |
| Front axle load, t | 8,7/8,4 |
| Rear axle load, t | 26 |
| Maximum lifting capacity | 55 t |
| Maximum load moment | 703 kN·m |
| Maximum transport weight | 43.1 t |
| Rated engine power | 277 kW |
| Volume | 8.82 L |
| Overall length | 14340 mm |
| Front axle load | 8,7/8,4 |
| Rear axle load | 26 t |
| Engine model | SC9DF380Q5P |
| Emission standard | Euro V |
| Maximum speed | 90 km/h |
| Minimum turning diameter | 24 m |
| Minimum ground clearance | 296 mm |
| Number of seats in the cab | 2 |
| Maximum main boom radius | 40 (boom length 46 m) |
| Main boom length | 11.8 m |
| Fully extended boom length | 46 m |
| Maximum boom length with jib | 62.3 m |
| Boom raising time | 45 s |
| Boom full extension time | 106 s |
| Maximum main winch hoisting speed (single line) | 125 m/min |
| Maximum auxiliary winch hoisting speed (single line) | 125 m/min |
| Maximum transport speed | 90 km/h |
| lifting capacity | 55t |
| load moment | 1985kN·m |
| boom length | 46m |
| working speed | 90km/h |
| weight | 43300kg |
| Crane type | self-propelled boom crane |
| Chassis | truck |
| Boom type | telescopic |
| Boom profile | high-strength box section |
| Number of boom sections | multi-section |
| Boom extension | by hydraulic cylinder and wire rope pulley block |
| Boom angle adjustment | by hydraulic cylinder |
| Slewing platform | full-slewing |
| Main winch | hydraulic |
| Auxiliary winch | depending on the version |
| Working unit | hook block |
| Jib | lattice, depending on the version |
| Outriggers | hydraulic |
| Support footprint | H-type or combined |
| Mechanism drive | hydraulic |
| Controls | electro-hydraulic |
| Load moment limiter | electronic |
| Outrigger monitoring | position and load sensors |
| Motion limiters | lifting, extension and slewing |
| Operator cab | separate crane cab |
| Working zone | 360° |
| Transport position | boom over the front support |
Configuration
Configuration
- Engine SC9DF380Q5P
- Main boom 11.8 m
- Jib
- maximum length of the boom system 62.3 m
- Main hoisting winch
- Auxiliary hoisting winch.