Truck Crane MAKROQ AC20

The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.

Lifting capacity20 t
Boom length33 m
Load moment735 kN·m
Working weight23.5
FeatureWheeled chassis
20 t Truck Crane MAKROQ AC20

Description

The truck crane is designed for loading and unloading, erection and construction work with frequent relocation between sites. The crane unit is mounted on a truck chassis, so the machine combines road mobility with the ability to perform lifting operations directly on site.

The telescopic boom allows fast changes of height and radius without installing additional sections. The outriggers form a stable working footprint, and the slewing platform allows the working area around the machine to be served. Separate control of the undercarriage and the crane unit simplifies preparation for work and precise positioning of the load.

The machine is used in industrial and civil construction, in the erection of steel structures and engineering equipment, in infrastructure maintenance, and in warehouse and logistics operations.

Key parameters: maximum lifting capacity — 20 t; rated engine power — 192 kW; maximum boom length with jib — 41.15 m; maximum lift height — 41.2 m; maximum main boom radius — 28 (boom length 33 m).

Advantages

Advantages

  • A lifting capacity of 20 t allows work with the corresponding class of loads.
  • A power of 192 kW provides the necessary reserve for working and travel operations.
  • A maximum boom length with jib of 41.15 m extends the available working area.
  • The boom system allows the height and radius to be changed for a specific erection task.
  • The outrigger footprint improves stability when lifting and slewing the load.
  • The slewing mechanism creates a wide working area without frequent repositioning of the machine.
  • The winch and hydraulic mechanisms ensure smooth positioning.
  • The design is intended for repeated erection and loading cycles.

Technical specifications

Max. lifting capacity, t20
Maximum load moment, kN·m480
Maximum transport weight, t23.5
Rated engine power, kW192
Volume, L6.64
Overall length, mm12000
Overall width, mm2500
Overall height, mm3470
Front axle load, t7.7
Rear axle load, t15.8
Maximum lifting capacity20 t
Maximum load moment735 kN·m
Maximum main boom length33.0 m
Maximum lift height41.2 m
Wheel configuration6×4
Number of outriggers5
Transport weight23 500 kg
Overall dimensions12 000×2500×3470 mm
Rated engine power192 kW
Volume6.64 L
Front axle load7.7 t
Rear axle load15.8 t
Engine modelSDEC SC7H260Q5
Emission standardEuro V
Maximum speed≥80 km/h
Minimum turning diameter≤20 m
Minimum ground clearance266 mm
Number of seats in the cab2
Maximum main boom radius28 (boom length 33 m)
Maximum boom length with jib41.15 m
Boom raising time≤35 s
Boom full extension time≤50 s
Maximum main winch hoisting speed (single line)≥130 m/min
Maximum auxiliary winch hoisting speed (single line)≥130 m/min
Maximum transport speed80 km/h
lifting capacity20t
load moment735kN·m
boom length33m
working speed80km/h
weight23500kg
Crane typeself-propelled boom crane
Chassistruck
Boom typetelescopic
Boom profilehigh-strength box section
Number of boom sectionsmulti-section
Boom extensionby hydraulic cylinder and wire rope pulley block
Boom angle adjustmentby hydraulic cylinder
Slewing platformfull-slewing
Main winchhydraulic
Auxiliary winchdepending on the version
Working unithook block
Jiblattice, depending on the version
Outriggershydraulic
Support footprintH-type or combined
Mechanism drivehydraulic
Controlselectro-hydraulic
Load moment limiterelectronic
Outrigger monitoringposition and load sensors
Motion limiterslifting, extension and slewing
Operator cabseparate crane cab
Working zone360°
Transport positionboom over the front support
Base boom length10.15 m
Jib length8.15 m
Number of outriggers5 pcs

Configuration

Configuration

  • Main boom 33.0 m
  • Engine SDEC SC7H260Q5
  • Jib
  • maximum length of the boom system 41.15 m
  • Main hoisting winch
  • Auxiliary hoisting winch.

Documentation

Manufacturer's specification
Certificate of conformity
Operation manual
Repair manual
Spare parts catalog

Overview